Frequently Asked Questions

Choose a location where the solar panel receives direct sunlight for at least 6 hours per day. Avoid areas shaded by trees or buildings.

Mark the drill points through the mounting holes, drill holes, insert wall plugs, and secure the light using the provided screws. Attach the light body after the bracket is fixed.

• Make sure the solar panel receives direct sunlight.
• Avoid shaded installation locations.
• Allow sufficient charging time, especially after cloudy or rainy weather.
• Keep the solar panel clean and free of debris.

SL015 includes three lighting modes:

• Light Sense Mode: Auto on at night and off at dawn with 20% dim light.
• Dim Light Motion Mode: 10% dim light all night and 100% brightness when motion is detected.
• Motion Sensor Mode: 100% brightness when motion is detected and turns off when motion stops.

• Charge the solar panel under direct sunlight for 1–2 days before first use.
• Make sure the power switch is ON.
• Test the light in darkness — it activates automatically when ambient light is low.

The solar sensor detects surrounding brightness. Make sure the solar panel is not covered or heavily shaded.

Lighting time depends on:

• Limited sunlight during the day.
• Weather and seasonal conditions.
• How often the motion sensor activates the light.

If needed, clean the solar panel, move the light to a sunnier location, or allow the battery to fully recharge on a sunny day.

Clean the solar panel regularly with a soft, damp cloth to maintain charging efficiency. Do not use harsh chemicals or abrasive cleaners.

The LED and rechargeable battery are not replaceable. Do not attempt to remove them, as this may compromise the light’s weather resistance.

LUNQHAL provides a 12-Month limited warranty against manufacturing defects under normal use. For details, visit our Warranty page.